The LeanOrder LevelScan uses sensor systems to determine the stock level of a container. If the level falls below a configurable minimum value, a replenishment order is triggered. In addition, an automatic inventory can be carried out in real-time. Like all LeanOrder products, the LevelScan is battery-operated and can therefore be used completely flexibly at… Read more »
Sub Category: At the Box
LotTrack DisTag on a FOUP
The DisTag can also be used on 300mm FOUPs, using to a special adapter system on the back (easy retrofit).
LotTrack DisTag on a SMIF Pod
The DisTag can be used with the existing holder systems for Asyst Tags or TelTags on SMIF Pods, using a special adapter on the back (easy retrofit). The adapter is designed in close cooperation with the customer, in order to ensure an optimum for operator assistance (inclination of the display) and to avoid collisions when… Read more »
LotTrack DisTag on an 8“ Wafer Box
Special holder systems enables an optimal position of the DisTag on the 8″ wafer box. This allows an optimal operator assistance (inclination of the display and the LED). In addition, a small overhang of the DisTag on the wafer box avoids collisions during storage processes in stocker systems.
LotTrack DisTag on a 6“ Wafer Box
For ideal assistance, the LotTrack DisTag (large display, LED) must be attached to the 6″ wafer box at the optimum viewing angle to the operator. This is achieved by customer-specific mounting systems, e.g. snap-in mounts for easy mounting and removal of the DisTag from the wafer box.
LotTrack DisTag on a 4“ Waferbox
Due to the compact design of the DisTag COM, it can also be attached to a 4″ wafer box. In addition to the localization of a lot, the DisTag also enables operator assistance via the large display and the LED.
LotTrack DisTag LOC
The DisTag LOC enables the localization of reticles and supports search functions with an integrated LED. Due to its compact design, the DisTag LOC can be easily mounted on the reticle.
LotTrack DisTag COM
The DisTag is the central component of the LotTrack system and the basis for functions such as operator assistance, automated tool starts as well as global and place-based localization. As an intelligent man-machine interface, it is attached to all wafer boxes or SMIF pods and integrates several innovative technologies. Its high-contrast, low-power display and pick-by-light… Read more »
LeanOrder PushTag
Using the PushTag, the demand is triggered by pushing a button (“Kanban Button”). The LED indicates the order status. The LeanOrder PushTag can be easily attached at any location. It can also be used for articles that cannot be stored in containers, such as hanging or long goods.
LeanOrder RotationTag
The RotationTag is an RFID transponder that can be mounted on any box. It transmits the order as soon as it is turned. The more compact design compared to the LeanOrder TurnTag allows it to be used in paternosters (carousel systems). An LED indicates the order status at any time.